BRSWD - F41-4008-750, F41-4001 TONER POWDER FOR CANON COPIERS(SUPPL)
- MSDS: BRSWD
- Manufacturer: CANON U S A INC
- Product Name: F41-4008-750, F41-4001 TONER POWDER FOR CANON COPIERS(SUPPL)
- National Stock Number: 6850-01-251-7243
Product Identification
Product ID:F41-4008-750, F41-4001 TONER POWDER FOR CANON COPIERS(SUPPL)
MSDS Date:04/01/1993
FSC:6850
NIIN:01-251-7243
MSDS Number: BRSWD
Responsible Party
LAKE SUCCESS, NY 11042
US
Emergency Phone: 516-488-6700/800-424-9300(CHEMTREC)
Info Phone: 516-488-6700
Preparer: JOSEPH PALMERI
Cage: 08YZ7
Contractor
Telephone: 800-323-5006
Cage: 5X817
Ingredients
STYRENE ACRYLATE COPOLYMER,
CAS: 25153-46-2
Fraction By Weight: 55-60%
IRON OXIDE
CAS: 1317-61-9
Fraction By Weight: 40-50%
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3
Hazards
LD50 LC50 Mixture:LD50, ORAL, RAT >10000MG/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:GASPING. EYE:NO SPECIFIC HAZARD
KNOWN TO CANON. HOWEVER ANY MATL CONTACTING EYE MAY BE IRRITATING.
SKIN:LOW HAZARD FOR INDUSTRIAL USE.
Explanation of Carcinogenicity:PER MSDS:INGRED LISTED ARE NOT LISTED ON
LATEST NTP ANNUAL REPORT/IARC/OSHA REG.
Effects of Overexposure:GASPING. EYE IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE FROM EXPOSURE TO FRESH AIR. EYE:OPEN EYE & FLUSH
W/PLENTY OF WATER. IF IRRIT PERSISTS GET MED ATTN. SKIN:WASH W/SOAP
& WATER. INGET:DRINK SEVERAL GLASSES OF WATER. CALL PHYSICIAN.
Fire Fighting
Extinguishing Media:WATER,DRY CHEMICAL,CARBON DIOXIDE. NON-FLAMMABLE
SOILID ACCORDING TO TEST METHOD 16CFR1500.44.
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:THIS MATERIAL LIKE MOST ORGANIC MATLS IN
POWDER FORM IS CAPABLE OF CREATING A DUST EXPLOSION.
Accidental Release
Spill Release Procedures:SWEEP MATL ONTO PAPER & PLACE IN FIBER CARTON.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT WITH OXIDIZING MATLS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE.
Ventilation:GOOD GENERAL VNETILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
NP-3025/3225/3525/3725 TONER BLACK.
Chemical Properties
HCC:N1
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4
Evaporation Rate & Reference:NEGLIG(N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE POWDER, SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NEGLIG
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS W/ANY OTHER ORG MATL DECOMPOSITION
WILL PRODUCE CARBON MONOXIDE AND CARBON DIOXIDE
Disposal
Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE REQUIRED. ENSURE
COMPLIANCE WITH FED/STATE &/OR LOCAL REGS. WASTE MAY BE TREATED AS
PLASTIC WASTE. REPORTABLE CHEM UNDER SARA TITLE III, CERCLA:NONE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.